Some homeowners like to use easy-to-remember addresses. Changing the default IP address of the router is necessary to prevent IP address conflicts with other modems or routers already installed on the network. The process of resetting the actual software to the factory default settings must still take place.Ĭhange the default IP address of the routerĮvery time the home router is powered on, it will use the same private network address unless the admin changes it. Unplugging or using the router's on / off switch does not cause the router to revert its IP address settings to default. Resetting the router is only necessary in rare situations, when the device is updated with an incorrect setting or invalid data, such as a firmware upgrade is faulty, causing it to stop responding to love. Even if the administrator has changed the default address before, resetting the router will change everything back to default. Resetting a Belkin router replaces all network settings, including its local IP address, by the manufacturer's default values. Press and hold this reset button for 30 to 60 seconds. On Belkin routers, the reset button is usually located on the back side of the Internet port. If you change the default login information and lose new login information, reset the router and then enter the default username and password. Default password: admin, password or blank.Default username: admin, Admin or leave blank.If you have never done this and just need the username and the default password for the Belkin router, try the following: You should change this information the first time you set up the router. You are prompted to enter the admin username and password before you can access the router control panel. This address is sometimes referred to as the default gateway address because client devices consider routers such as ports to the Internet and computer operating systems sometimes use this term on their network configuration menus. Enter this URL in the address field in the browser: (DHCP), or place a custom Domain Name System (DNS) server.Īny device connected to a Belkin router using the default IP address can access the router control panel on the web browser. The administrator must know the address to connect to the router's control panel through the browser, to perform things like changing the wireless password, setting up port forwarding, enabling or disabling Dynamic Host Configuration Protocol.
0 kommentar(er)
